Timber Board Care Instructions

Washing
      • Wash by hand ONLY!
      • Never under any circumstance use the dishwasher
      • Consider a quick rinse for light use
      • Wash gently with lukewarm & detergent when required
      • Wash the board evenly on both sides and all edges this will keep it from cupping             
      • Never submerge your board or allow it to sit in water

drying

• Immediately dry after washing with a soft towel to absorb the excess surface water
• Allow the board to air dry standing up or on a wire rack completely before storing
• Drying a bored evenly will be key to avoid cupping, twisting or warping
• Once dry return the board to its home

Storage

• suggestion is to store the board vertically on one of the long edges, this allows the airflow to both sides
• If stored flat on a counter,  frequently flip the side facing up
• Exposing only one side to air will eventually cause that side of the board to dry out, this can lead to cupping

Waxing

• All our grazing Boards and Charcuterie Boards have been finished with a high Quality Beeswax 
• we recommend that after every few washes you rewax your board to keep it looking fresh and clean this will also help it from drying out 
• Apply a good even coat of Beeswax to all sides of the board and let sit over night or a few hours to let it soak in, and then polish off with a good quality microfiber cloth 
• Once done return the board to its home